NT08 SERIES - BOLT ON KIT

For single bolt cultivator and scarifier tines in the 90kg to 150kg breakout range. Standard Single System Kit features a close 12mm point and 40mm closer assembly. Other boot options available. Kit weight 4.5kg.

For complete list of kits in this series, order codes and prices see catalogue

 

NT11 SERIES - SLIP-ON KITS

For double bolt cultivator and chisel tines up to 350kg (750lb) breakout pressure. Standard Single System Kit features a 16mm point and 50mm closer assembly. 12mm point optional for up to 200kg breakout in favorable conditions. Other points, boots and accessories available. Kit weight 6.5kg.

NT11 kits suit such tines as:
Flexi-Coil, Gason, Horwood Bagshaw, Morris, Ezee-On, Bourgualt, Chisel tynes

For complete list of kits in this series, order codes and prices see catalogue .
*Patent Appl. No. 43406/99
*Design Reg. No. 144009

WING POINT

The Slip-on Winged point features a 60mm wide tungsten tipped wing to provide additional cultivation with minimal surface disturbance.

NT11 series only.

For list of points, part numbers and prices see catalogue
*Design Reg. No. 143969
SWEEP ADAPTOR

The Sweep Adaptor slips into the place of the narrow point allowing you to change quickly from a no-till to conventional working without unbolting anything. The Sweep Adaptor replicates the bottom of the tine, allowing you to bolt on to the adaptor what you would normally bolt to the tine.

For list of hole size options and prices see catalogue

*Sweeps are not supplied by Agmaster

TRASH GUARDS

These Trash Guards clamp to the point holder and tine to provide better trash flow in heavy residue. Can be fitted to NT11 series only

For prices and order codes see catalogue

 

NT08 & NT11 Boot Options.
For complete list of boots, part numbers and prices see catalogue

SINGLE SYSTEM

Single System closer assemblies place seed and fertilizer together at a constant depth.

40mm closer supplied for 12mm points
50mm closer supplied for 16mm points
65mm closer available for greater spread.
SIDE BY SIDE SYSTEM
Side By Side System is a simple, effective method of placing seed and fertilizer side by side in the seeding row. Toxicity control is achieved by sideways separation. Features a 65mm closer.
SPLIT SYSTEM
An extension of the Side by Side System. This places a row of seed both sides of a slightly deeper band of fertilizer. Features a 65mm closer.
FLEXIBLE RUBBER BOOT

Allows banding of fertilizer and then seed delivery through a double braided flexible hose. Seed hose is 32mm I.D. and has a 50mm closer standard. Fertilizer bracket accommodates a 35 mm O.D. Hose (not supplied with kit)

Available with 40mm or 50mm closer plate

For complete list of kits, part numbers & prices see catalogue

Only available for NT11 Systems (Double bolt type tines)

LIQUID FERTILISER OPTIONS

For complete list of options, part numbers and prices see catalogue

LIQUID FERTILISER KIT

Specific points are available to allow delivery of liquid fertilizer directly behind the point.


Weld-on bracket can be positioned on the boot where desired.
Only available for NT11 Systems (Double bolt type tines)