We would like to give our customers advance notice of our upcoming price rise. Like most industries, we are continuing to see rising input costs, therefore we will be implementing a price rise on most of our parts for 2026. For the 2025 season, we applied a price freeze to all products to thank our loyal customers for their ongoing support following the new ownership and management of Agmaster, therefore everything is currently priced at a discounted rate.
As you may already be aware, global tungsten prices have been increasing exponentially, unlike anything we have ever seen before. Unfortunately, they are continuing to increase and with it being such an essential material in many of our products, it has regrettably resulted in a substantial price increase on all of our tillage/ground-engaging tools. We understand the impact of price rises on our customers and every product has been assessed individually with careful consideration. The below image illustrates what has happened over the past six months with the price of the tungsten carbide powder that our blocks and tiles are made from. If you are interested you can read more about it here https://www.yatechmaterials.com/en/news/china-tungsten-prices-hit-record-high-apt-tops-66000/

We have already been looking into alternative supply options should prices continue to increase into 2026, but we will not risk the quality of our products, so any change in supplier or material will need to be tested during seeding before any changes are even considered.
These price changes will generally apply from 1st January 2026 but our “While Current Stocks Last” condition will be in place, and new 2026 prices will apply if 2025 stock is exhausted before this date. If you would like specific prices on any Agmaster parts you use please contact the parts and sales team on 08 9358 1555 or sales@agmaster.com.au
A general idea of price increases are below. Please note these are a general idea only, some parts may fall outside the ranges provided:
|
Seeding Kits |
10-12% |
|
Points |
15-30% |
|
Seeding boots and other replacement parts |
0-20% |
|
Standard Presswheel Modules |
7% |
|
Emu Tracker Wheel |
25% |
|
Fixed Extension Arms & Presswheel Parts |
0-10% |
|
Harrow Gangs |
6% |
|
Telescopic Arms & Harrow Parts |
0-10% |
|
Bolts & Fasteners |
0-15% |
In addition to the general increases provided above, the specific changes to some of our more common parts are listed below.
NOTE: These increases are on the excluding GST price of the product. Where there is a price rise on a point and/or boot/bracket or other component, there will consequentially be a price rise on any Seeding Kit/Boot & Bracket Kit/Point & Holder Kit that the part is a component of.
POINTS & HOLDERS
|
Part Description |
Price Increase |
|
|
NT19 Standard Adjusta-Points |
$25 |
28% |
|
NT19 Liquid Adjusta-Points |
$25 |
21% |
|
NT19 Point Holders |
$0 |
0% |
|
NT11 12mm Standard Points |
$10 |
15% |
|
NT11 14/16mm Standard Points |
$15 |
19% |
|
NT11 12mm Liquid Points |
$10 |
10% |
|
NT11 14/16mm Liquid Points |
$15 |
14% |
|
NT11 Point Holders |
$0 |
0% |
BOOTS & BRACKETS
|
Part Description |
Price Increase |
|
|
NT19/NT11/NT08 Brackets |
$0 |
0% |
|
NT11 Cast Single Boots |
$10 |
17% |
|
NT11 Fab SBS Boots |
$15 |
12% |
|
NT11 Fab Dual Boot |
$15 |
9% |
|
Weld-On Closer Plates |
$5 |
20% |
|
NT19/NT11 Flexi-Boots |
$5 |
6% |
|
NT19/NT11 Flexi-Boot Brackets |
$5 |
8% |
|
Single Row Closer for Multi-Boot |
$0 |
0% |
|
Paired Row Seeker Wing for Multi-Boot |
$15-20 |
10-14% |
PRESSWHEELS
|
Part Description |
Price Increase |
|
|
Complete Presswheel Modules |
$30 |
7% |
|
Fixed Extension Arms – Single |
$25 |
4% |
|
Fixed Extension Arms – Double |
$30 |
4% |
HARROWS
|
Part Description |
Price Increase |
|
|
Full Star Harrow Gang |
$50 |
3% |
|
Full Coil Harrow Gang |
$100 |
7% |
|
Complete Telescopic Arm |
$75 |
7% |
E & OE